Kitchen exhaust · Configured industrial applications
Trion Air Boss Model 75: Modular Exhaust Filtration and Size Guide
Explore Model 75 ESP, media and odor-control sections, compare 25 published cabinet models and prepare a kitchen exhaust or industrial application review.
Start with the application
Match the system, not just the cabinet.
Review the required airflow, collection objective, selected stages, installation and ongoing service together.
Manufacturer photograph; equipment shown may include optional sections.
A configurable system for the exhaust stream
Air Boss Model 75 is a modular electrostatic air-cleaning family used for commercial kitchen exhaust and suitable industrial processes. The equipment arrangement is assembled around the application rather than selected as a single fixed-CFM appliance.
For kitchen work, describe the cooking equipment, fuel, hood airflow and discharge surroundings. For industrial work, identify the process, materials and contaminant characteristics. The final configuration and safety review depend on those details.
Separate particle collection from odor treatment
An ESP section charges airborne particles and retains them on collector plates. Additional media and adsorber sections can be selected for their respective filtration and odor-treatment roles. The fan must be matched to the assembled equipment and the adjoining system.
Odor adsorption is a separate selection from particulate collection. Identify the compounds or odor concern and the treatment objective. Neither a family airflow range nor a particle-efficiency percentage demonstrates removal of every gas.
Read the model table at the right efficiency
The brochure provides 25 cabinet models. Use the grouped comparison below to follow a manageable set of model columns. The displayed airflow points use the 0.3-micron DOP columns; the brochure's ASHRAE dust-spot columns describe a different test basis and are not mixed into this chart.
A higher listed CFM value may correspond to a lower collection efficiency. Also include the resistance of the selected filters, odor sections, transitions and ductwork when reviewing the fan. Cabinet dimensions in the ESP table do not establish the complete assembled system length or service envelope.
Specify cleaning and service access
Confirm whether the proposed assembly includes automatic wash equipment; the brochure's dimensional table identifies washing as optional. Coordinate the selected wash system, detergent, drains and controller using the project submittal and applicable installation manual.
Provide access on the specified side for cell and filter removal. Routine wash-operation checks and periodic inspection remain necessary when automatic cleaning is supplied. The manufacturer's maintenance quick checks complement the full service instructions; they do not replace trained service or the installation-specific maintenance plan.
Trion modular ESP · model comparison
Compare Model 75 cabinet sizes
Models across the top, features down the left. Select a model to highlight its column. ✓ Standard = listed base feature; ✓ Optional = selected additional section, subject to configuration review.
Scroll horizontally to compare every model. All 25 brochure models are organized into three cabinet-number groups.
| Feature / configuration | 75-102-XXHighlighted | 75-103-XX | 75-104-XX | 75-105-XX | 75-106-XX | 75-107-XX | 75-108-XX | 75-109-XX | 75-110-XX |
|---|---|---|---|---|---|---|---|---|---|
| CFM at 95% · 0.3-micron DOP | 1,285 | 2,093 | 2,570 | 3,378 | 4,186 | 4,663 | 5,471 | 6,280 | 6,756 |
| CFM at 90% · 0.3-micron DOP | 1,593 | 2,596 | 3,187 | 4,190 | 5,192 | 5,783 | 6,786 | 7,789 | 8,379 |
| Cell face area · sq. ft. | 2.94 | 4.79 | 5.88 | 7.73 | 9.58 | 10.67 | 12.52 | 14.37 | 15.46 |
| PWM power supplies · quantity | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 |
| Electrostatic collection | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Additional media section | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| Odor-control section | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| Wash arrangement | Specify package | Specify package | Specify package | Specify package | Specify package | Specify package | Specify package | Specify package | Specify package |
CFM is tied to the stated DOP particle test point. Do not combine the 95% and 90% columns into a fixed-efficiency range, treat them as odor-removal ratings, or mix them with the brochure’s ASHRAE dust-spot columns. Actual selection includes all filter stages, airflow distribution and total fan static pressure.
XX is the brochure’s model-number placeholder, not a complete ordering suffix. The Model 75 dimensional table identifies washing as optional; confirm the selected cleaning package and current ordering details. Additional media, odor, fan and fire-protection arrangements require project-specific review.
Source: Model 75 brochure, model tables p. 6 (PDF). Published reference tables; confirm current equipment with Tillman.
Prepare your project review
- Appliances or process, materials/fuel and operating hours
- Required CFM, collection objective and separate odor concerns
- Hood/pickup layout, duct resistance and proposed discharge
- Available space, service access, support and electrical supply
- Selected wash utilities, controls and fire-protection coordination
- For replacement: complete model/serial number, component labels and photos
Common questions
Is Model 75 one model or a family?
It is a modular family. The comparison covers the 25 cabinet model entries in the manufacturer brochure; media, odor, fan and cleaning arrangements are additional selection decisions.
Can the published CFM table size the whole exhaust system?
It supports the ESP cabinet review at stated test points. Final selection still needs the required collection target, selected stages, total pressure losses and fan duty.
How do I request replacement parts?
Send the complete model and serial number, photos of the nameplate and existing component, and the part number if available. A cabinet-family label alone does not confirm component compatibility.
Manufacturer resources
- Model 75 brochure · model and CFM tables p. 6 (PDF)
- Model 75 installation, operation and service manual (PDF)
- Model 75 / ATS maintenance quick checks (PDF)
Literature reviewed November 13, 2026. Verify the current factory selection, options and project submittal before ordering.
Talk with Tillman & Associates
We help engineers, contractors and facility teams across Houston, San Antonio, Austin, Corpus Christi, Beaumont, College Station, Galveston and surrounding South Texas communities.
Send your project details →